Reset your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may need to restore your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the adjustments or are experiencing unexpected performance. Fortunately, resetting your How to factory reset holosun eps carry red dot? Holosun is a straightforward process that can be performed in just a few actions.

• First ensuring your red dot sight is powered on.
• Identify the small reinitialize button on the bottom of the device.
• Use a thin tool to activate the reset button for approximately 7 seconds.
• Release the reset button and your Holosun EPS Carry Red Dot sight will reboot.
• The red dot sight should now be set back to its factory settings.

Reset Your Holosun EPS Carry Red Dot back to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to start fresh, resetting it to its factory configuration is a breeze. First, locate the tiny button on the bottom of your optic. Then, press and hold it for around five seconds until you see a brief flash. Your Holosun EPS Carry is now reset to its factory settings, ready for consistent targeting.

revive your Holosun EPS Carry Back to Life

Is your beloved Holosun EPS Carry experiencing some glitches? Don't despair! A simple factory reset can often fix the problem and get your red dot sight back to its former glory. Before you begin, remember to detach the battery from your Holosun EPS Carry to prevent accidental activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these simple steps:

• Press and hold the power button for approximately 7 seconds.
• The display will flash, indicating that the reset is in progress.
• Let go of the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can re-attach the battery and test your sight's functionality. If you encounter any further problems, don't hesitate to contactHolosun's customer support.

Return Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Adhere to these steps carefully to ensure a successful factory reset.

• Beginning with, Energize your Holosun EPS Carry by pressing the power button.
• Next, press and hold both the mode button and the up/down adjustment button simultaneously.
• While continue holding these buttons, tap the power button once.
• A message will show a confirmation prompt indicating that the reset process is initiated.
• Allow the process to complete. This may take a few moments. Once done, your Holosun EPS Carry will automatically power off.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Reset All Settings on Your Holosun EPS Carry

To Default reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Pressing a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an option that says "Clear Settings". Select this option and confirm the reset. Your sight will then power off and restart with all settings Returned to their default values.

Reset your Holosun EPS Carry with a Factory Standard Settings

If your Holosun EPS Carry is acting funny, a factory reset might be the answer. This will set back your sight to its original settings, clearing any personalized configurations you've made. To perform this reset, adhere to these simple steps:

• To begin, find the reset switch on your EPS Carry.
• Then, engage a fine object, like a pen tip, to depress the reset button.
• While maintain the reset switch engaged, turn your EPS Carry.
• It will blink a message confirming that the reset is finished.

When the reset is complete, your EPS Carry will be set to its factory settings.

Report this wiki page